WIKTOR 14kw Sliding door

Fireplace with trapezoid ground plate, dedicated to small and medium houses. Big vision of fire with relatively low heating power and size.

Technical specification

Rated output (kW) 14,0

Range of heating power (kW) 7.0 - 18.0

Efficiency (%) 70,0

Exhaust outlet diameter (mm) 200

Complies with Ecodesign criteria No

Designed for heat recovery unit No

Fuel type recommended seasoned hardwood with moisture ≤20%

Weight (kg) 201,0

CO emission (at 13% O 2 ) ≤ given in % 0,61

Flue gas temperature (℃) 352,0

Max log length (cm) 45

Emission of dust (mg/Nm ) 99,7

Compliance with BImSchV 2 standard No

The energy efficiency index EEI 92,35

The minimum active field of exhaust grilles (cm ) ≥900

The minimum active field of inlet grilles (cm ) ≥700

Glazing type straight

Opening of the doors - Lift Up

Material cast iron Width (cm) 90,40

Height (cm) 114

Depth (cm)  43,70

External air inlet No

The liner of the combustion chamber No

Ashpan Yes

Decorative printed glass No

 MAXIMUM USE OF ENERGY

Maximum use of heat due to densely spaced radiators and the wall of the insert made of high quality cast iron with a thickness of 8 mm.

Increased heat exchange surface between the hot exhaust gases and the room due to the high flue.

Combustion of fuel particles thanks to deflector, which extends the exhaust gas path.

Increased efficiency of the insert through manual control of chimney draft by using the built-in damper.

Manual control over the combustion process carried out by ash tray regulator.

SAFETY AT THE HIGHEST LEVEL

Front of insert is equipped with a heat-resistant ceramics that can withstand temperatures up to 660^oC.

Decorative fence helps to maintain the tidiness and protects against falling out of wood.

Fireplace's doors resistant to tensions and stable thanks to the use of closed profile. Door seals designed in profiled canal what guarantees proper adherence and protects against ewentual falling out while operating.

CONVENIENT TO USE

The door of the insert works in the lift up system - the window is lifted up. This system was built based on the counterweight - the steel cable pulley works in guides on two ball bearings, thanks to which the weight of the door is distributed evenly. They move on fireproof bearings along the sliding guides mounted in the frame, which guarantees their light, quiet and trouble-free operation. Movement of the door runs a few millimeters away from the body, which prevents damage to the seal. Lockable doors are pressed with great force into the frame, thanks to which the furnace is completely sealed.

Thanks to the raised and lowered door, you can load the right amount of wood at a time. An additional mechanism that allows the side windows to be opened, making them easier to clean and to keep the furnace clean.

Ash drawer / ashtray, where the remains of burnt wood are gathered and grate for easy ash removal.

Reduced soot deposition through a system of pure glass (air curtain).

A convenient handle to open the door.

The possibility of leveling the fireplace insert thanks to the adjustable legs.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 660°C. It gives a fireplace a modern and elegant look, visually enlarges the front of the insert.